ltc1051csw资料 | |
![]() |
ltc1051csw |
file size : 116 kb
manufacturer:linear description:notes: 1. the device may be operated outside recommended frequency ranges without damage, but functional operation is not guaranteed. selecting the appropriate fs value based on input frequency range allows the pll to operate in its sweet spot where jitter is lowest. 2. the level to be set on fs is determined by the nominal operating frequency of the vco and time unit generator. the vco frequency always appears at 1q1:0, 2q1:0, and the higher outputs when they are operated in their undivided modes. the frequency appearing at the ref and fb inputs will be the same as the vco when the output connected to fb is undivided. the frequency of the ref and fb inputs will be 1/2 or 1/4 the vco frequency when the part is configured for a frequency multiplication by using a divided output as the fb input. 3. skew adjustment range assumes that a zero skew output is used for feedback. if a skewed q output is used for feedback, then adjustment range will be greater. for example if a 4tu skewed output is used for feedback, all other outputs will be skewed c4tu in addition to whatever skew value is programmed for those outputs. max adjustment range applies to output pairs 3 and 4 where 6tu skew adjustment is possible and at the lowest fnom value. |
1pcs | 100pcs | 1k | 10k | ||
型 号:ltc1051csw 厂 家:linear 封 装:0529 批 号:smd/dip 数 量:3002 说 明: |
|||||
运 费: 所在地: 新旧程度: |
|||||
联系人:林浩/林妮 |
电 话:0755-82532799/82532766/83989559 |
手 机:13510168121/13725556003 |
qq:496982847/351622092 |
msn:linearic@hotmail.com |
传 真:0755-82532766 |
email:maxim_zi@126.com |
公司地址: 深圳市福田区佳和大厦b座1802室 门市部:华强广场 q2a114展销柜 |