max705资料 | |
![]() |
max705 |
file size : 116 kb
manufacturer:maxim description:the circuit of the tsop22..ya1 is designed in that way that unexpected output pulses due to noise or disturbance signals are avoided. a bandpassfilter, an integrator stage and an automatic gain control are used to suppress such disturbances. the distinguishing mark between data signal and dis- turbance signal are carrier frequency, burst length and duty cycle. the data signal should fulfill the following conditions: • carrier frequency should be close to center fre- quency of the bandpass (e.g. 38 khz). • burst length should be 10 cycles/burst or longer. • after each burst which is between 10 cycles and 70 cycles a gap time of at least 14 cycles is necessary. • for each burst which is longer than 1.8 ms a corre- sponding gap time is necessary at some time in the data stream. this gap time should be at least 4 times longer than the burst. • up to 800 short bursts per second can be received continuously. some examples for suitable data format are: nec code (repetitive pulse), nec code (repetitive data), toshiba micom format, sharp code, rc5 code, rc6 code, r-2000 code, sony code. when a disturbance signal is applied to the tsop22..ya1 it can still receive the data signal. how- ever the sensitivity is reduced to that level that no unexpected pulses will occure. some examples for such disturbance signals which are suppressed by the tsop22..ya1 are: • dc light (e.g. from tungsten bulb or sunlight) • continuous signal at 38 khz or at any other fre- quency |
1pcs | 100pcs | 1k | 10k | ||
型 号:max705 厂 家:maxim 封 装:0630 批 号: 数 量:27054 说 明: |
|||||
运 费: 所在地: 新旧程度: |
|||||
联系人:林浩/林妮 |
电 话:0755-82532799/82532766/83989559 |
手 机:13510168121/13725556003 |
qq:496982847/351622092 |
msn:linearic@hotmail.com |
传 真:0755-82532766 |
email:maxim_zi@126.com |
公司地址: 深圳市福田区佳和大厦b座1802室 门市部:华强广场 q2a114展销柜 |