max757cpa资料 | |
![]() |
max757cpa |
file size : 116 kb
manufacturer:maxim description:the isl6118 undervoltage (uv) feature prevents turn-on of the outputs unless the correct enable state and vin > 2.5v are present. during initial turn-on the isl6118 prevents fault reporting by blanking the fault signal. rising and falling outputs are current-limited voltage ramps so that both the inrush current and voltage slew rate are limited, independent of load. this reduces supply droop due to surge and eliminates the need for external emi filters. during operation, once an oc condition is detected the appropriate output is current limited for 12ms to allow transient conditions to pass. if still in current limit after the current limit period has elapsed, the output is latched off and the fault is reported by pulling the corresponding fault low. the fault signal is latched low until reset by the enable signal being de-asserted at which time the fault signal will clear. |
1pcs | 100pcs | 1k | 10k | ||
型 号:max757cpa 厂 家:maxim 封 装:0618 批 号: 数 量:7852 说 明: |
|||||
运 费: 所在地: 新旧程度: |
|||||
联系人:林浩/林妮 |
电 话:0755-82532799/82532766/83989559 |
手 机:13510168121/13725556003 |
qq:496982847/351622092 |
msn:linearic@hotmail.com |
传 真:0755-82532766 |
email:maxim_zi@126.com |
公司地址: 深圳市福田区佳和大厦b座1802室 门市部:华强广场 q2a114展销柜 |