max8211csa资料 | |
![]() |
max8211csa |
file size : 116 kb
manufacturer:maxim description: the positive and negative high voltage supplies on the msk 610 can be adjusted to reduce power dissipation. the output of the msk 610 will typically swing to within 8v of either output voltage power supply rail. therefore, if the system in question only needs the output of the amplifier to swing 0 to 40v peak, the power supply rails could be set to -15v and 50v safely. for best performance, the minimum value of vhv should be 50vdc. the -vsc pin may be directly con- nected to ground if the output does not need to swing through zero volts. the high voltage and low voltage power supplies should be decoupled as shown in figure 1. |
1pcs | 100pcs | 1k | 10k | ||
型 号:max8211csa 厂 家:maxim 封 装:0633 批 号:sop8 数 量:5986 说 明: |
|||||
运 费: 所在地: 新旧程度: |
|||||
联系人:林浩/林妮 |
电 话:0755-82532799/82532766/83989559 |
手 机:13510168121/13725556003 |
qq:496982847/351622092 |
msn:linearic@hotmail.com |
传 真:0755-82532766 |
email:maxim_zi@126.com |
公司地址: 深圳市福田区佳和大厦b座1802室 门市部:华强广场 q2a114展销柜 |