sab-c167sr-lmba资料 | |
![]() |
sab-c167sr-lmba |
file size : 116 kb
manufacturer: description:the minimum vin must meet two conditions: vin 2.3v and vin (vr 3.0%) vdropout. vr is the nominal regulator output voltage. for example: v r = 1.2v, 1.5v, 1.8v, 2.5v, 2.8v, 3.0v, 3.3v, 4.0v, 5.0v. the input voltage (vin = vr 1.0v); iout = 100 µa. tcv out = (vout-high - vout-low) *106 / (vr * ∆temperature), v out-high = highest voltage measured over the temperature range. v out-low = lowest voltage measured over the temperature range. load regulation is measured at a constant junction temperature using low duty cycle pulse testing. changes in output voltage due to heating effects are determined using thermal regulation specification tcvout. dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its measured value with a vr 1v differential applied. the maximum allowable power dissipation is a function of ambient temperature, the maximum allowable junction temperature and the thermal resistance from junction to air (i.e., ta, tj, ja). exceeding the maximum allowable power dissipation will cause the device operating junction temperature to exceed the maximum 150c rating. sustained junction temperatures above 150c can impact the device reliability. the junction temperature is approximated by soaking the device under test at an ambient temperature equal to the desired junction temperature. the test time is small enough such that the rise in the junction temperature over the ambient temperature is not significant. |
1pcs | 100pcs | 1k | 10k | ||
型 号:sab-c167sr-lmba 厂 家: 封 装:0529 批 号:smd 数 量:3000 说 明: |
|||||
运 费: 所在地: 新旧程度: |
|||||
联系人:林浩/林妮 |
电 话:0755-82532799/82532766/83989559 |
手 机:13510168121/13725556003 |
qq:496982847/351622092 |
msn:linearic@hotmail.com |
传 真:0755-82532766 |
email:maxim_zi@126.com |
公司地址: 深圳市福田区佳和大厦b座1802室 门市部:华强广场 q2a114展销柜 |